Ir para o conteúdo principal

Alterações no passo #4

Edição por Imad Knight

Edição aprovada por Imad Knight

Antes
Depois
Sem alteração

Linhas de Passo

[title] Removing the vibration motors.
[* black] For this step, you will need to de-solder the wires that connect the motors to motherboard. Or, if you are like me and don't have a solder, you can attempt to rip the wires of.
[* black] First of, lift the whole motor out of the plastic mount. This may take some force as it is glued in.
-[* black] After that, simply rip the cable off of the motherboard, or de-solder it. In the first picture you can see what your controller will look like with one motor missing.
+[* black] After that, simply cut the cable off of the motherboard, or de-solder it. In the first picture you can see what your controller will look like with one motor missing.
[* black] Repeat the same on the other side.