Ir para o conteúdo principal

Alterações no passo #2

Edição por Ryan Velasco

Edição aprovada por Scott Havard

Antes
Depois
Sem alteração

Linhas de Passo

[title] Unhooking the battery
[* black] Once the cover is off, the controller should look like this. Follow the red and black wire(s) from the battery to the connector.
-[* black] Then take a pair of small pliers and unhook the battery (refer to picture 2 of this step to see it unhooked).
-[* black] The battery will simply lift out reviling the motherboard (refer to picture 3 ots).
-[* black] From here, the plastic holding the battery will be able to be simply lifted out.
+[* black] Take a pair of small pliers and unhook the battery (refer to picture 2 of this step to see it unhooked).
+[* black] The battery will simply lift out revealing the motherboard (refer to picture 3 ots).
+[* black] From here, the plastic holding the battery will be able to lifted out.