Ir para o conteúdo principal

Alterações no passo #1

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use the pointed end of a spudger to disconnect the display data connector from its socket on the logic board.
[* black] Use the pointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board.
[* icon_reminder] When reconnecting these, press down from one end of the connector to the other. If you press in the middle of the connector, you may bend it, causing damage or a poor connection.