Ir para o conteúdo principal

Alterações no passo #1

Edição por Scott Havard

Edição aprovada por Scott Havard

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use the flat tippointed end of a spudger to disconnect the display data connector from its socket on the logic board.
[* black] Use the flat tippointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board.
[* black] Use the flat tippointed end of a spudger to disconnect the display data connector from its socket on the logic board.
[* black] Use the flat tippointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board.