Ir para o conteúdo principal

Alterações no passo #3

Edição por jamesqb2001

Edição recusada por Taylor Dixon

Antes
Depois
Sem alteração

Linhas de Passo

[* black] While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on2mm on the side of the display. Inserting the pick too far maydeeper than 2mm will damage the LCDbacklight assembly, LCD display, or touchscreen.
[* icon_caution] Do not use solvents to soften or release the adhesive, as they will enter between the screen layers and cause irreparable damage to the display
.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on2mm on the side of the display. Inserting the pick too far maydeeper than 2mm will damage the LCDbacklight assembly, LCD display, or touchscreen.
[* icon_caution] Do not use solvents to soften or release the adhesive, as they will enter between the screen layers and cause irreparable damage to the display
.