Conserte seus objetos Comunidade Loja

Alterações no passo nº 10

Edição por Philip Le Riche —

Edição aprovada por Philip Le Riche

Antes
Depois
Sem alteração

Linhas do passo

[* black] Disconnect a linkage between the temperature control mechanism and the steam valve. You can do this by pressing one part with a small flat-blade screwdriver while supporting the other underneath. Take care as these small plastic parts could easily be broken.
-[* black] A linkage on the other side operated bu the automatic steam control simply lifts off.
+[* black] A linkage on the other side operated by the automatic steam control simply lifts off.
[* black] Slide both mechanisms back as far as they will go.
[* black] Note that on reassembly both mechanisms and the knobs controlling them must all be in their rear-most positions to ensure they re-connect correctly.