Alterações no passo nº 10
Edição por Philip Le Riche —
Edição aprovada por Philip Le Riche
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Disconnect a linkage between the temperature control mechanism and the steam valve. You can do this by pressing one part with a small flat-blade screwdriver while supporting the other underneath. Take care as these small plastic parts could easily be broken. |
|---|---|
| + | [* black] A linkage on the other side operated bu the automatic steam control simply lifts off. |
| + | [* black] Slide both mechanisms back as far as they will go. |
| + | [* black] Note that on reassembly both mechanisms and the knobs controlling them must all be in their rear-most positions to ensure they re-connect correctly. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado