Pular para o conteúdo principal

Alterações no passo #5

Edição por Walter Galan

Aguardando aprovação

Sem alteração

Linhas de Passo

[* black] Remove the heat sink from the logic board, minding any cables that may get caught.
[* icon_note] If the heat sink appears to be stuck to the logic board after removing all screws, it may be helpful to use a spudger to separate the two components.
[* icon_reminder] If you need to mount the heat sink back onto the logic board, we have a [guide|744|thermal paste guide] that makes replacing the thermal compound easy.
[* black] Logic board remains.