Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #6

Edição por Evan Noronha —

Edição aprovada por Evan Noronha

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] When replacing your AirPort card, it may be helpful to use curved tweezers to angle the card upward and insert it into the AirPort slot.
[* black] With the tweezers pointed downwards, insert the points of the tweezers through the screw holes next to the antenna cable sockets.
[* black] Press down on the AirPort card to angle it upwards such that the card is parallel to the logic board.
[* black] Align the AirPort card with it's slot on the logic board, and insertpress the card into the slotslot until the screw holes nearest the connector align with those in the logic board.
[* black] Align the AirPort card with it's slot on the logic board, and insertpress the card into the slotslot until the screw holes nearest the connector align with those in the logic board.