Ir para o conteúdo principal

Alterações no passo #3

Edição por Evan Noronha

Edição aprovada por Evan Noronha

Antes
Depois
Sem alteração

Linhas de Passo

+[* black] Insert the tip of a spudger between the right speaker and the antenna cable that is routed into the speaker's right side.
+[* black] Run the spudger down along the right side of the speaker to pry the antenna cable from its channel in the right speaker.
+[* icon_note] If the channel is not easily accessible, you can pull the speaker gently away from the case to gain access to the antenna cable.
+[* icon_caution] ***IS THIS NECESSARY IN THIS MODEL?***