Ir para o conteúdo principal

Alterações no passo #2

Edição por Paige Reisman

Edição aprovada por Paige Reisman

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Remove the two 10 mm T10 Torx screws securing the right speaker to the rear enclosure.
- [* icon_note] These screws have rubber washers that may keep them in place after being loosened. You can use a magnet or tweezers to remove the screws completely, or simply leave them and they'll come out with the speaker.
+ [* icon_note] Rubber washers keep the screws snug in the speaker even when loosened. You can use tweezers or a fingernail to remove the screws, or simply leave them with the speaker assembly.