Ir para o conteúdo principal

Alterações no passo #2

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

-[* red] Remove the two 10 mm T10 screws securing the right speaker to the rear enclosure.
- [* icon_note] These screws have rubber washers behind the speaker that may hold the screw in place after being loosened. You can use a magnet to remove the screws, or simply leave them in place until you remove the speaker.
+[* red] Remove the two 10 mm T10 Torx screws securing the right speaker to the rear enclosure.
+ [* icon_note] These screws have rubber washers that may keep them in place after being loosened. You can use a magnet or tweezers to remove the screws completely, or simply leave them in place until you remove the speaker.