Ir para o conteúdo principal

Alterações no passo #8

Edição por Antti Immonen

Edição aprovada por Antti Immonen

Antes
Depois
Sem alteração

Linhas de Passo

[title] Stripping off the backlight strip
[* black] Just slowly edge your exacto knife through under the backlight strip to remove it.
[* icon_caution] Avoid cutting the backlight cable. If you do accidentally cut it, and know some basics about microsoldering, you could consider repairing it using [guide|63842|this] guide.
[* black] Proceed to unplug the backlight to remove it. In some cases the backlight flex is soldered onto the LCD flex, but can be desoldered and later reattached with relative ease. Or you can just leave the backlight flex be, it might not need to be removed to successfully clean the remaining LCD layers.
[* black] Proceed to unplug the backlight to remove it. In some cases the backlight flex is soldered onto the LCD flex, but can be desoldered and later reattached with relative ease. Or you can just leave the backlight flex be, it might not need to be removed to successfully clean the remaining LCD layers.