Ir para o conteúdo principal

Alterações no passo #3

Edição por Taylor Dixon

Edição aprovada por Taylor Dixon

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Lift the fan out of the mini for enough clearance to access its connector.
-[* black] Grab all the wires at once and gently pull straight ***UP*** to disconnect the fan from the logic board. A lot of people damage their unit in this step. You might want to read the comments before attempting it.
+[* black] Grab all the wires at once and gently pull ***straight up*** to disconnect the fan from the logic board.
[* icon_caution] Do ***not*** pry at the socket, or you may rip it from the logic board.
[* black] Remove the fan.