Ir para o conteúdo principal

Alterações no passo #3

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Sem alteração

Linhas de Passo

[* black] Lift the fan out of the mini for enough clearance to access its connector.
-[* black] Use a Spudger to carefully pry the fan cable connector UP out of its socket on the logic board.
+[* black] Grab all the wires at once and gently pull to disconnect the fan from the logic board. Alternatively, slide a spudger underneath the wires and pry up to disengage the connector.
+ [* icon_caution] Do ***not*** pry at the socket, or you will rip it from the logic board.
[* black] Remove the fan.