Ir para o conteúdo principal

Alterações no passo #13

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Sem alteração

Linhas de Passo

-[* black] Use tweezers to pull the XXX ribbon cable straight out of its ZIF connector.
+[* black] Use tweezers to carefully pull the upper button assembly ribbon cable straight out of its connector.
[* icon_caution] There is very little give on this cable, so you may need to apply a decent amount of force. Be sure you are pulling the cable straight back, and not upward against the connector.