Ir para o conteúdo principal

Alterações no passo #12

Edição por gentry

Edição recusada de Walter Galan

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Carefully remove the logic board assembly from the upper case, minding any cables that may get caught.
[* icon_note] Hold the antenna cables out of the way as you lift the heat sink end of the logic board out of the upper case.
[* black] When disassembling, keep the rubber gasket in position on the heatsink, or, when reassembling, replace the lower arms of the rubber gasket in position beneath the heatsink before seating the board