Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Andrew Bookholt —

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas do passo

+[* icon_note] For precautionary purposes, we advise that you disconnect the battery connector from the logic board to avoid any electrical discharge. This step is ***optional*** and is not required.
+[* black] Grab the clear plastic pull tab attached to the battery connector and pull it toward the front edge of the Air to disconnect the battery from the logic board.
+[* icon_caution] Do not lift upward on the connector as you disconnect it.