Alterações no passo nº 3
Edição por Andrew Bookholt —
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board. |
|---|---|
| + | [* black] Carefully pull the optical drive off its mounting pins on the right side of the outer case to gain clearance for disconnecting the optical drive cable. |
| + | [* black] Allow the optical drive to hang down as you de-route the optical drive thermal sensor connector from behind the GPU heat sink. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado