Alterações no passo nº 14
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* icon_caution] Be careful not to touch any solder joints on the back of the power supply. Capacitors may be charged enough to give you a dangerous shock. |
|---|---|
| [* black] Remove the following four screws: | |
| [* red] One 9.3 mm T10 coarse-threaded screw | |
| [* orange] One 25 mm T10 coarse-threaded screw | |
| [* yellow] Two 22 mm fine-threaded screws | |
| [* black] Pull the upper right and lower left corners of the power supply away from the rear case to dislodge the mounting posts attached to the power supply's corners. | |
| - | [* icon_caution] Make sure the computer has been powered off and unplugged for at least 15 minutes. The capacitors on the power supply can electrocute you if they haven't been discharged. |