Pular para o conteúdo principal

Alterações no passo #1

Edição por Kyle Knechtel

Edição aprovada por Kyle Knechtel

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Locate the white flex ribbon cable that connects the power button to the motherboard. Pull this cable out from the motherboard end.
[* orange] Remove the 5five black 8.3mm long screws with a Phillips #1 screwdriver.
[* yellow] Remove the 2two silver 12.8mm long screws with a Phillips #1 screwdriver.
[* orange] Remove the 5five black 8.3mm long screws with a Phillips #1 screwdriver.
[* yellow] Remove the 2two silver 12.8mm long screws with a Phillips #1 screwdriver.
[* black] Remove the device from the bottom shell casing.