Pular para o conteúdo principal

Alterações no passo #1

Edição por Kyle Knechtel

Edição aprovada por Kyle Knechtel

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Locate the white flex ribbon cable that connects the power button to the motherboard. Pull this cable out from the motherboard end.
[* orange] Remove the 5 black 8.25mm8.3mm long screws with a phillipsPhillips #1 screwdriver.
[* yellow] Remove the 2 silver 12.75mm12.8mm long screws with a phillipsPhillips #1 screwdriver.
[* orange] Remove the 5 black 8.25mm8.3mm long screws with a phillipsPhillips #1 screwdriver.
[* yellow] Remove the 2 silver 12.75mm12.8mm long screws with a phillipsPhillips #1 screwdriver.
[* black] Remove the device from the bottom shell casing.