Alterações no passo nº 3
Edição por Benjamin Troller —
Edição aprovada por Benjamin Troller
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_note] We reccomend using a plastic opening tool for this step. | |
| - | [* black] Pry the device apart by pulling the plastic backing and display assembly away from each other. |
| - | [* icon_caution] Do not try to do this with only your hands. You will require a significant amount of force to separate the device. |
| + | [* black] Pry the back panel from the device by pulling the plastic backing and display assembly away from each other. |
| + | [* icon_caution] Do not try to separate the front and back with only your hands. Use a tool to pry them apart and then use your hands to separate them completely. |
| + | [* black] Separate the back panel and display assembly by aggressively shoving a plastic opening tool into the seam between |