Skip to main content

Alterações no passo #12

Edição por Ron Davis

Edição aprovada by Ron Davis

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] RemovingNext out: the midframe that housed the motherboard, plus a littleaccompanied by the small ribbon cable on the side that includesand the attached headset button.
[* black] Also, there'sA closer look at the midframe reveals a slot for the little black nub on the backrear of the display panelpanel.
[* icon_note] This slot allows the nub
to peek through and slide along that white teflonTeflon strip. Looks This ''looks'' like a linear potentiometer, which wouldcould be used to track IPD position as you adjust the displays.
[* black] We remove a smaller midframe and quickly peel away the rubber light-gasket from around the lenses.
[* black] RemovingNext out: the midframe that housed the motherboard, plus a littleaccompanied by the small ribbon cable on the side that includesand the attached headset button.
[* black] Also, there'sA closer look at the midframe reveals a slot for the little black nub on the backrear of the display panelpanel.
[* icon_note] This slot allows the nub
to peek through and slide along that white teflonTeflon strip. Looks This ''looks'' like a linear potentiometer, which wouldcould be used to track IPD position as you adjust the displays.
[* black] We remove a smaller midframe and quickly peel away the rubber light-gasket from around the lenses.