Ir para o conteúdo principal

Alterações no passo #4

Edição por Chris

Edição aprovada por Craig Lloyd

Antes
Depois
Sem alteração

Linhas de Passo

[title] Checking the new spark plug
-[* black] Always inspect your new spark plugs before installing. Check the gap on your replacement spark plugs with a feeler gauge. It should be set to .040 inches.
+[* black] Always inspect your new spark plugs before installing. Check the gap on your replacement spark plugs with a feeler gauge. It should be set to .040 inches (1.016mm).
[* icon_note] If they are not pre-installed, make sure that the crush washer and terminal nut are installed.