Ir para o conteúdo principal

Alterações no passo #4

Edição por Eric Essen

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Checking the new spark plug
-[* icon_note] Always inspect your new spark plugs before installing. Check the gap on your replacement spark plugs with a feeler gauge. It should be set to .040 inches.
-[* icon_note] Make sure that the crush washer and screw on plug nut are installed.
+[title] Checking the new spark plug
+[* black] Always inspect your new spark plugs before installing. Check the gap on your replacement spark plugs with a feeler gauge. It should be set to .040 inches.
+[* icon_note] If they are not pre-installed, make sure that the crush washer and terminal nut are installed.