Alterações no passo nº 3
Edição por Jade Weiss —
Edição aprovada por Jade Weiss
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Holding the back panel firmly, use a spudger to pry off the small plastic panel holding the mic cable in place. |
|---|---|
| + | [* black] Use a heat gun to melt the glue keeping the mic cable in place and then remove it. |
| + | [* icon_caution] During reassembly this plastic piece may need to be glued back on to ensure the mic cable stays in place on the back panel. |