Alterações no passo nº 2
Edição por Zack McCauley —
Edição aprovada por Zack McCauley
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Opening the Case |
|---|---|
| + | [* orange] Open the MicroSD Card Reader door. It will assist when opening the case as there is a snap point directly beside this door. |
| + | [* black] Starting from the corner, slide your spudger down and in at a steep angle. You will hear a click as the snap loosens. Slid the spudger inside the case and turn 90° to the left or the right to release the snap. |
| + | [* black] Begin by slowly working your way around the case. If you come across a section that does not release as easy, leave it and go the opposite direction around the case. Eventually the pressure will release and the back case will pop off. |
| + | [* icon_note] You can use the back casing as a screw tray for the battery, so keep it close. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado
Imagem 3
Nenhuma imagem anterior
Adicionado