Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Remove the following two screws:
[* red] One 3.3 mm Phillips screw
[* orange] One 2.1 mm Phillips screw
[* black] Lift the metal retainer clip straight up from its recess in the rear panel.
[* icon_note] If the camera comes up with the retaining clip, don't worry. Just separate the camera from the clip before reinstalling, so you can be sure to get the connector in the right place.
[* icon_caution] Be sure the small thermal pad is attached to the metal retaining clip as seen in the third picture when replacing the rear camera.