Alterações neste passo
Edição por Jonathan Mysona —
Edição aprovada por Jonathan Mysona
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Attach and solder the flash's leads to the motherboard. |
|---|---|
| + | [* icon_caution] WARNING!: When replacing with a new flash component, make sure to solder the leads to their corresponding positive(SPK+) and negative(SPK-) terminals on the motherboard. IF THIS IS DONE INCORRECTLY THE DEVICE WILL NOT HAVE FLASH CAPABILITIES. |
| + | [* black] Check manufacturer's specifications for which color wire is positive and which color wire is negative. Generally, the red wire is positive and the black wire is negative. |