Alterações no passo nº 2
Edição por Jonathan Mysona —
Edição aprovada por Jonathan Mysona
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Lay device flat on the table. |
|---|---|
| - | [* black] Firmly grip the device on the edges. Take the wedge portion of the spudger tool and push in between the battery and the screen with force. |
| - | [* black] Begin pushing the spudger with the wedge underneath the battery all the way around and push further across and underneath until the battery is loose. |
| - | [* icon_note] The battery is heavily glued to the screen and much force may be needed to break the glued bond. |
| - | [* black] The battery should be loose at this point. |
| + | [* black] Desolder the battery's connection terminals from the motherboard. |
| + | [* icon_note] If you do not know how to desolder look at this [guide|750|soldering and desoldering guide] |
| + | [* black] Remove the battery by pulling it out of the device. |
| + | [* icon_note] The next and final step will be for reattaching a battery to the device. |