Alterações no passo nº 1
Edição por Jonathan Mysona —
Edição aprovada por Jonathan Mysona
- Antes
- Depois
- Sem alteração
Linhas do passo
+ | [* black] Hold the device firmly, in landscape view. |
---|---|
+ | [* black] Locate the crevice that separates the front cover from the back cover. Then hold the plastic opening tool and insert the wedge portion of the tool into the crevice. |
+ | [* icon_note] Note: Some force may need to be applied and there may be a cracking sound. This is normal. |
+ | [* black] Slowly slide the wedge portion of the plastic opening tool while applying some upward force around the device until the back cover is completely loose. |
+ | [* black] Place the screen in the palm of your hand and then with your other hand to carefully grab the case and remove the cover like flipping the page of a book. |
+ | [* black] Lay the device down as such and notice that the camera flash will be attached to the back cover with a wire, carefully remove this from the back cover. |
+ | [* icon_note] The flash may be glued in treat with care and remove gently. |