Ir para o conteúdo principal

Alterações no passo #1

Edição por Lisa

Edição recusada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Use the flat end of a spudger to carefully pry the trackpad connector up from its socket on the logic board.
+[* black] If you have the new trackpad with a cable fitted, use the flat end of a spudger to carefully pry its connector up from the socket on the logic board.
+[* black] Otherwise, it is better to disconnect the cable from the trackpad. To do it, lift the tiny lever on the outer side of the connector. Do not hurry to take it out, it is glued to the trackpad.