Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Miroslav Djuric

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] If your replacement headphone jack includes the white plastic hold switch, simply reinstall the headphone jack. If your replacement part does not include the plastic hold switch, follow the next steps to transfer the plastic hold switch to your new headphone jack.
[* icon_note] If you're just trying to remove the rear panel, you can skip these steps.
[* red] Remove the single Phillips screw nearest to the hold switch.
[* black] Lift the plastic portion of the Hold switch away from the orange ribbon cable.
[* icon_reminder] Ensure that the black notch lines up with the gray slider during reassembly of the switch (see picture 2).

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado