Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por Petr Doležal

Edição recusada por Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Starting from the bottom, use a plastic opening tool to pry off the middle panel from the phone.
[* black] The midpanel is attached to the body by clips at only a few places.
[* black] The top rectangular part is held up by: 1 grey clip right below the camera (orange arrow), 2 black clips near the edges (yellow arrows). All three are pieces coming from the body hooked in the middle panel. All three are visible even when the panel is attached.
[* black] The middle narow part is attached by: the same black clip as described above, 1 cm below the botom of the volume button (yellow); two grey clips coming from the battery case (orange). All three visible.
[* black] The bottom part is attached by:
[* black] 2 grey clips coming from the battery case (visible,orange arrow); one black clip coming from the midpanel hooking into the body 1 cm right of the USB between the two backpanel sockets (hidden, green circle)
[* black] one black clip coming from the midpanel hooking into the body into the backpanel socket immediatelly left of the USB-C port (visible, green circle);
[* icon_caution] Be careful when doing this because the middle panel comes in two pieces and if you start at the top, you may break the connection between the two pieces.

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado