Ir para o conteúdo principal

Alterações no passo nº 4

Edição por TailasTheFix

Edição recusada por Adam O'Camb

Antes
Depois
Sem alteração

Linhas do passo

[* black] Remove seven Phillips screws securing the motherboard to the upper case:
[* red] Four 2.5 mm gold screws
[* orange] Two 3.5 mm black screws
- [* yellow] One 2.5 mm silver screw
+ [* yellow] One 2.5 mm silver screw,
[* black] Lift the side of the motherboard that sits along the bottom edge of the 3DS.
+[* black] Note that if you decide to remove the 2.5mm silver screw you might lose the volume slider in turning the system over.