Alterações no passo nº 2
Edição por Tai —
Edição aprovada por Miroslav Djuric
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Use the flat end of a spudger or your fingernail to flip up the retaining flap on the speaker assembly ribbon cable ZIF socket. | |
| - | [* icon_caution] Be sure you are prying up on the hinged retaining flap, |
| + | [* icon_caution] Be sure you are prying up on the hinged retaining flap, NOT the socket itself. Damaging the socket or cable will result in a 3DS that will blink its power LED when you press the power button - and do nothing else. |
| [* black] Disconnect the speaker assembly ribbon cable with a pair of tweezers. |