Ir para o conteúdo principal

Alterações no passo #3

Edição por Andrew Bookholt

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board.
[* black] Carefully pull the optical drive off its mounting pins on the edgeright side of the outer case to gain clearance for disconnecting the optical drive cable.
[* black] De-routeAllow the optical drive to hang down as you de-route the optical drive thermal sensor connector from its recess behind the AirPort cardGPU heat sink.
[* black] Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board.
[* black] Carefully pull the optical drive off its mounting pins on the edgeright side of the outer case to gain clearance for disconnecting the optical drive cable.
[* black] De-routeAllow the optical drive to hang down as you de-route the optical drive thermal sensor connector from its recess behind the AirPort cardGPU heat sink.