Ir para o conteúdo principal

Alterações no passo #4

Edição por Roger

Edição aprovada por Jake Devincenzi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Remove following two screws:
+ [* black] Take care! These screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments on the right before proceeding.
[* red] One 8.6 mm Phillips screw
[* orange] One 3.9 mm Phillips screw
[* black] Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.