Ir para o conteúdo principal

Alterações no passo #4

Edição por David Hodson

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Remove following two screws:
[* red] One 8.6 mm Phillips screw
[* orange] One 3.9 mm Phillips screw
[* black] Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.
-[* black] Note that there is a small nose on the short flat side of the metal assembly, that has to go under the upper case frame on the outer rim of the case during reassembly.