Histórico do passo nº 5 do guia Roller Skate Bearing Replacement

Alterações no passo nº 5

Edição por Lachlan Mulig — 16 de mar de 2016

Edição aprovada por Lachlan Mulig

	[* black] Secure the wheel into place
	[* light_blue] Place the nut onto the axle.
	[* light_blue] Grip the nut with the pliers.
	[* light_blue] Rotate clockwise until right. There should be a tiny bit of space between the nut and the wheel.
	[* icon_note] Try not to tighten the nut too much or else the wheel may not spin effectively.
-	[* icon_reminder] If ~~you~~ one of your wheels doesn't spin as well as the rest, check to make sure the bearing are fully placed in their sockets.
+	[* icon_reminder] If one of your wheels doesn't spin as well as the rest, check to make sure the bearing are fully placed in their sockets.