Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por faorazem

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Remove the following 4 screws:
[* red] Three 1.8 mm Phillips #00 screws securing the headphone jack and GPS antenna to the rear panel. Note that the head of the middle screw is smaller in diameter. Also make note of the washer underneath the ribbon cable secured by the rightmost screw.
[* red] Three 1.8 mm Phillips #00 screws securing the headphone jack and GPS antenna to the rear panel. Note that the head of the middle screw is smaller in diameter. Also make note of the washer underneath the ribbon cable secured by the rightmost screw.
[* orange] One 3.8 mm Phillips #00 screw in the plastic loop near the headphone jack.