Ir para o conteúdo principal

Alterações no passo #5

Edição por Brett Hartt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] 8.Now, gently stretch and pull New Seal all the way down vertical assembly of Overflow Tube and Float near bottom and position it into its top groove of Flush Valve. 9.Once in place, you should be able to gently grasp edge of New Seal and turn it in place, in groove, around base of flush valve. Check seal by flushing, watching and listening. There is nothing to reassemble.
+[* black] Gently stretch and pull the new seal all the way down the vertical assembly of the overflow tube and float near the bottom and position it into its top groove of the flush valve.
+[* black] Once in place, you should be able to gently grasp the edge of the new seal and turn it in place in the groove, around the base of the flush valve. Check the seal by flushing, watching and listening.