Ir para o conteúdo principal

Alterações no passo #4

Edição por Brett Hartt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] 6.When New Seal is between where Trip Lever is connected to tank and where Trip Lever protrudes through square Trip Lever Holder, for a moment, pull the flexible Water Refill Tube out of the center of the Stop Cap. Point the free end of it down, as water may still be coming through it after flushing (step 1). 7.Take New Seal just over the Stop Cap and replace the Water Refill Tube, being careful not to splash any water coming out of it.
+[* black] When the new seal is between where the trip lever is connected to tank and where trip lever protrudes through square trip lever holder, for a moment, pull the flexible water refill tube out of the center of the stop cap. Point the free end of it down, as water may still be coming through it after flushing.
+[* black] Take the new seal just over the stop cap and replace the water refill tube, being careful not to splash any water coming out of it.