Ir para o conteúdo principal

Alterações no passo #4

Edição por M J McAllister

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] 1. Take New Seal just over the Stop Cap and replace the Water Refill Tube, being careful not to splash any water coming out of it. 2. Now, gently stretch and pull New Seal all the way down vertical assembly of Overflow Tube and Float near bottom and position it into its top groove of Flush Valve. 3. Once in place, you should be able to gently grasp edge of New Seal and turn it in place, in groove, around base of flush valve. Check seal by flushing, watching and listening. There is nothing to reassemble.
+[* black] 6.When New Seal is between where Trip Lever is connected to tank and where Trip Lever protrudes through square Trip Lever Holder, for a moment, pull the flexible Water Refill Tube out of the center of the Stop Cap. Point the free end of it down, as water may still be coming through it after flushing (step 1). 7.Take New Seal just over the Stop Cap and replace the Water Refill Tube, being careful not to splash any water coming out of it.