Ir para o conteúdo principal

Alterações no passo #3

Edição por Brett Hartt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] 4.***Magic Step A*** Roll New Seal and stick it through square Trip Lever Holder and lasso the free end of the Trip Lever (the opposite end is attached to flush lever outside tank). 5.***Magic Step B*** Then, keeping the Trip Lever through large center hole of the New Seal, pull New Seal in reverse direction back through the square Trip Lever Holder. Turn Trip Lever Holder as you do this to allow more space to ease New Seal back through.
+[* black] Roll the new seal and stick it through the square trip lever holder and lasso the free end of the trip lever (the opposite end of the lever is attached to the flush lever outside of the tank).
+[* black] Keeping the trip lever through large center hole of the new seal, pull the new seal in the reverse direction back through the square trip lever holder. Turn the trip lever holder as you do this to allow more space to ease the new seal back through.