Skip to main content

Alterações no passo #2

Edição por Jake Devincenzi

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Pull the keyboard ribbon vertically from logic board to release connection.
[* icon_note] The connector may be tight and difficult to remove. If stuck try rocking the connector back and forceforth while pulling up until it releases. This same process can be used for many of the connectors on this device.
[* icon_note] The connector may be tight and difficult to remove. If stuck try rocking the connector back and forceforth while pulling up until it releases. This same process can be used for many of the connectors on this device.
[* icon_note] Remove battery and CD/DVD drives before proceeding any further.