Skip to main content

Alterações no passo #2

Edição por Byron Hoefer

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Pull the keyboard ribbon vertically from logic board to release connection.
[* icon_note] The connector may be tight and difficult to remove. If stuck try rocking the connector back and force while pulling up until it releases. This same process can be used for many of the connectors on this device.
[* icon_note] Remove battery and CD/DVD drives before proceeding any further.

Imagem 1

Nenhuma imagem anterior

Adicionado