Pular para o conteúdo principal

Alterações neste passo

Edição por Mandy Pederson

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] On the left side of the phone, there are three copper colored clips.
[* [* black] UnclipAll that should be left is the bottom, threadmetal framing. Gently lift this out, threading the middle through the logic board,bottom clip and pull the top one out gently.clip through the piece
[* [* black] UnclipAll that should be left is the bottom, threadmetal framing. Gently lift this out, threading the middle through the logic board,bottom clip and pull the top one out gently.clip through the piece
[* black] You can then lift the logic board out of the phone.
[* icon_note] Do this at an angle, lifting the side to the right of the SIM card instructions.
[* icon_caution] One of the strips is attached to the front of the case, and goes through the logic board. Be careful not to break this piece.
[* black] All that should be left is the metal framing. Gently lift this out, threading the bottom clip and the top clip through the piece