Pular para o conteúdo principal

Alterações neste passo

Edição por Ian Mitchell

Aguardando aprovação

Sem alteração

Linhas de Passo

[* black] Remove one remaining screw in the logic board.
[* black] Unclip the wire that connects the back of the case to the logic board.
[* black] You can then lift the logic board out of the phone.
[* icon_note] Do this at an angle, lifting the side to the right of the SIM card instructions.
[* icon_caution] One of the strips is attached to the front of the case, and goes through the logic board. Be careful not to break this piece.